PDA

View Full Version : Using Tarp Tent on Tent Pads



Gideon85
02-26-2016, 12:59
How much trouble has anyone had pitching a tarp or tarptent on a tent pad? When you cannot use stakes, what do you do and has this ever been an issue on the AT?

Thanks for your comments

soumodeler
02-26-2016, 13:12
Large rocks to hold out the guylines or jamming the stake in between slats.

Slo-go'en
02-26-2016, 13:14
There is always some way to guy out the tent, even if you have to resort to using rocks for anchors. It can be helpful to have extra cord. Lately I've taken to carrying half a dozen 1.5" roofing nails (they have a large head) and tap those into the planks to use instead of stakes. Then I use a tent stake to pry them out in the morning.

Gideon85
02-26-2016, 16:02
Thanks for the comments, most appreciated.

egilbe
02-26-2016, 16:06
Large rocks to hold out the guylines or jamming the stake in between slats.

This. Ive never had to drive any nails into a platform to pitch my tarp. The tent stakes in between the slats is perfect.

colorado_rob
02-26-2016, 16:14
Yeah, jam stakes in cracks & such. My problem with tent pads is that they were never really quite big enough for my non-freestanding tarp-type tent (zpacks solo+). I could usually squeeze on diagonally, barely.

Franco
02-26-2016, 17:26
It depends on the exact design.
Some can stand up with 4 or so stakes over a small footprint others require a lot more space.
You can always just Google and see if you can find a photo of the tent you are after pitched on a platform.
For example I typed "Tarptent Notch platform" and Google images gave me this shot :
33825
You can see how the two ends are secured, then you add the poles and guy them out to the side.
franco@tarptent

garlic08
02-26-2016, 18:43
I've never done it, but if you carry a multitool with a Phillips driver, drywall screws work as anchors.

Franco
02-26-2016, 19:29
Here in Australia many use wood screw hooks .
Often their are to be found already screwed into the sides.
But you can also jam a stake into the gaps (easier to do with a stick...)Something like this :
33829
(those anchors don't work on thick planks)

Here is a photo of two Notches :
33827
and a TT Squall , just for fun :
33828

soilman
02-27-2016, 11:26
Many platforms are not quite long enough for my TT Contrail but I make it work. I use rocks, tie around planks, etc. You might not get a perfect pitch but you will figure it out.