Anyone have any tips to keep your hip belt from loosening as you walk?
I have a backpack I like, but keep having to tighten the belt.
Anyone have any tips to keep your hip belt from loosening as you walk?
I have a backpack I like, but keep having to tighten the belt.
Loop the free end under the belt, next to your shirt? Might need to examine the buckle and perhaps replace it. Might not have enough "teeth" or they are worn.
For a couple of bucks, get a weird haircut and waste your life away Bryan Adams....
Hammock hangs are where you go into the woods to meet men you've only known on the internet so you can sit around a campfire to swap sewing tips and recipes. - sargevining on HF
Years ago I had this problem on a pack that pulled from two directions. Sitting in camp, I used a needle and thread and stitched on side of the strap down which solved 1/2 the problem. Then, for the rest of that packs life (a couple decades), when carrying a load big enough to cause slippage, I tucked the loose end under and around the buckle into an overhand knot. I had to untie the know to adjust the length, but in all, it worked surprisingly satisfactorily.
I'm not lost. I'm exploring.
Question---is the pack new or old?? All worn pack harness systems slip due to two factors---worn plastic buckles and worn webbing. Once it happens there's no fixing it except full replacement of buckles and webbing, a tough job requiring some major sewing with awls etc. Replacing the entire hipbelt from the company might be the best option.
I find that in my "newer" packs that those where the adjustment on the hip belt is to pull forwards and in on each side, that those seem to hold tighter than the older buckles that you pull back and to the sides. The pull forward and in type tend to have a slider that is angled and bites the belt more.
Sometimes washing the belt helps some if you have a lot of buildup in it. New buckle can help too as mentioned. Or a regular slider if there isn't one, but they can be annoying because they are harder to adjust in the first place vs. a loose end and pulling.
"Sleepy alligator in the noonday sun
Sleepin by the river just like he usually done
Call for his whisky
He can call for his tea
Call all he wanta but he can't call me..."
Robert Hunter & Ron McKernan
Whiteblaze.net User Agreement.
I too have this problem but I always thought it was because I just don't have any hips!
One thing I've noticed is that, at least on my pack, if the shoulder straps are too loose, all the pressure goes to the hip belt and the constant movement from walking makes it start to work loose. Usually, instead of cranking down the hip belt, I will do a moderate tightening on both the hips and the shoulder straps.
"I am learning nothing in this trivial world of [humans]. I must break away and get out into the mountains to learn the news." --John Muir
Not sure where the dividing line is between old and new, but this pack had minor slippage even when it was new. Hmm, maybe if I lost some fat I'd have a little more hip bone for the hip belt to grip. I was wondering if anyone has had luck scuffing up the belt or applying chemicals to reduce slippage. Probably there are no well known such solutions or someone would have mentioned it already.
"Sleepy alligator in the noonday sun
Sleepin by the river just like he usually done
Call for his whisky
He can call for his tea
Call all he wanta but he can't call me..."
Robert Hunter & Ron McKernan
Whiteblaze.net User Agreement.
I don't know it is the best approach for your situation, but for a grippy solution I found that home-made seam sealer (GE Si2 in mineral spirits) works well to add traction to items, and the solvent carrier helps it to provide more than a surface layer as it can soak in before evaporating.
Maybe some of that cushy shelf liner material?
Try Goop Glue. Very tough & flexible when dry.Goop Glue 01172021.jpeg It should provide a good friction surface if you spread it on.
"To make an end is to make a beginning. The end is where we start from." - T.S. Eliot
Sew in velcro. A 2" soft strip horizontally on the body-side strap, and a smaller hook square on the outer strap will still give you some adjustment room. Make sure you DO NOT use the adhesive one as it won't hold, and if you try to sew through it it will gum-up your needle and machine.
"Maybe life isn't about avoiding the bruises. Maybe it's about collecting the scars to prove we showed up for it."
Interesting thread.
Another view on the issue of loosening hip belt is, that while hiking my belly is shrinking a bit and causes the hip belt to feel loose after several hours.
So even while carrying my brand-new Lightwave pack with perfect buckles I have to tighten the hip belt several times during the day.
On my thru hike I had that issue. I ended up getting 2 plastic strap loops for those (the rounded rectangle with a bar through the center type, sort of like Φ but squared off instead of a circle and got them to hold the ends on either side (by removing the main buckle temporarily to get this in place. This held the pack strap firm, but adjusting it was much more difficult but still possible. On my thru I didn't need to readjust it much and was a big win.
I just bought a Kelly redcloud 90 and all straps were rolled up and electric taped . And looking at reviews straps slippage is a problem with this pack so maybe a solution for you?
I bought this pack at a yardsale for $50.
I've always just thought of it as "driving the pack" (I didn't invent the term) - tightening or loosening or adjusting things as you hike is just how packs work.
Neat way to think about it, I definitely do this as I am more tolerable to tightening up the hip belt later in the day than in the morning when I still soft.