for a lightweight stove pot - what is the best way to get the lid off withoug tearing up the rim? Can opener didn't work
for a lightweight stove pot - what is the best way to get the lid off withoug tearing up the rim? Can opener didn't work
Dogs are excellent judges of character, this fact goes a long way toward explaining why some people don't like being around them.
Woo
you need to use a side-cut style can-opener
"The best way to spend your life is to build something that will outlast it."
can't help you - my choice was to chop the top off at the third ring under the rim so that I could get my hand to fit into the pot to wipe it out after use - without the rim the can may get bent a little easier but it is very easy to round it back out using ones hands
if I had to leave the rim on I would try to scribe a groove on the inside of the rim where I wanted to have the top removed - scribe it several times in the same place then scribe an X across the top - break the top at the center of the X and work the breaks to the rim then work the 1/4 sections of the top up and down to break the top from the rim - this is similar to the technique for making soda can stoves - unfortunately I am no longer able to fine work like that so I don't even try thus the chop the top off and even it up with sissors approach that I use
I had to be very gental, almost going around twice, it worked - thanks!
Well I am using the top off one, and dropping on a rimmed one of another.
Last edited by Wise Old Owl; 07-19-2008 at 14:35.
Dogs are excellent judges of character, this fact goes a long way toward explaining why some people don't like being around them.
Woo
Could one of the stove gurus post a link or at least the manuf. name of the best opener to use & where to find?
Here's a photo:
Skids
Insanity: Asking about inseams over and over again and expecting different results.
Albert Einstein, (attributed)
Hey skids, do you chop your Heini can or keep it full size.
If you find yourself in a fair fight; your tactics suck.
Skids
Insanity: Asking about inseams over and over again and expecting different results.
Albert Einstein, (attributed)
I have two heini cans,(they are impossible to find in my area) so I don't want to screw them up experimenting. Is there a step by step instruction anywhere?
If you find yourself in a fair fight; your tactics suck.
Sure. Sift through this thread.
It's all in there. If you have any technique or method questions ask them here and I'll be glad to answer them for everyone.
Skids
Insanity: Asking about inseams over and over again and expecting different results.
Albert Einstein, (attributed)
Thanks.....I had to read it a couple times to get it. You're a freaking genius.
If you find yourself in a fair fight; your tactics suck.
Skids
Insanity: Asking about inseams over and over again and expecting different results.
Albert Einstein, (attributed)